Low-cut site shoe
Full-grain cowhide, antibacterial mesh lining, memory foam insole. The shoe a fitter wears all day on concrete.
EN ISO 20345 · S3 SR · steel toe 200 J
EU 36–48View model →
Category · EN ISO 20345
JBT-711
JBT-712
JBT-L603
JBT-L605
JBT-8387
JBT-299
Safety footwear
Six shapes on two standards. The 711, 712, L603 and L605 are site boots: steel toe at 200 joules, steel plate under the foot, PU outsole that grips wet concrete. The JBT-8387 is the welding boot — composite toe and plate, metatarsal guard, heat-resistant HRO rubber outsole to 300 °C, tested to EN ISO 20349-2. The JBT-299 is the S5 PVC Wellington for wet, muddy and chemical floors.
Mid-cut site boot
The same last as the 711 with ankle support, for site crews and cold mornings.
EN ISO 20345 · S3 SR · steel toe 200 J
EU 36–48View model →
Slip-on, no laces
Nothing to tie and nothing to catch a spark. The boot for welding bays and site gates.
EN ISO 20345 · S3S SR · steel toe
EU 37–48View model →
Lace-up, brown or wheat
Crazy horse brown and wheat nubuck — the color Polish distributors ask for first.
EN ISO 20345 · SB P SR · steel toe 200 J
EU 37–48View model →
Welding boot
Composite toe and plate, metatarsal guard over the instep, HRO rubber outsole to 300 °C contact heat.
EN ISO 20349-2 · S3S SR CI HI HRO
composite toeView model →
PVC Wellington boot
Tall waterproof PVC boot, steel toe 200 J and steel midsole. For wet, muddy and chemical floors.
EN ISO 20345 · S5 WR · steel toe
EU 36–47View model →
Technical data
| Model | Cut | Class | Sizes |
|---|---|---|---|
| JBT-711 | Low shoe | S3 SR | EU 36–48 |
| JBT-712 | Mid boot | S3 SR | EU 36–48 |
| JBT-L603 | Slip-on | S3S SR | EU 37–48 |
| JBT-L605 | Lace-up | SB P SR | EU 37–48 |
| JBT-8387 | Welding boot | S3S SR CI HI HRO | EU 37–47 |
| JBT-299 | PVC Wellington | S5 WR | EU 36–47 |
Individual shoe boxes, 10 pairs per export carton. 62 × 34 × 45 cm, 18/16 kg on the 711. Private label: logo on the tongue, your artwork on the box.
A site boot and a welder's boot are not the same boot
The 711, 712, L603 and L605 carry S3 or better: steel toe at 200 joules, a steel plate under the foot, an antistatic sole and a PU outsole that grips wet concrete. What they do not carry is an HRO marking, because a PU sole is the wrong compound for standing on hot plate.
For the welding bay we quote the JBT-8387 instead. It moves to a composite toe and composite plate, adds a metatarsal guard over the instep, and uses a heat-resistant rubber outsole marked HRO — contact heat to 300 °C. It is also tested to EN ISO 20349-2, which is the line a buyer should look for when the boot stands next to the bench.
Everything else is shape. The 711 is the low shoe for fitters and inspectors. The 712 is the same last in a mid boot for site crews. The L603 drops the laces so nothing catches a spark. The L605 is the lace-up in brown crazy horse and wheat nubuck.
What comes in the carton
- Full-grain cowhide uppers, antibacterial mesh lining, memory foam insole
- Steel toe 200 J and steel anti-penetration plate on the S3 models
- Slip-resistant PU outsole and midsole, antistatic
- EU 36–48 on the 711 and 712, EU 37–48 on the 603 and 605
- Individual shoe boxes, 10 pairs per export carton
- Private label: logo on the tongue, your artwork on the box
Norms
- EN ISO 20345
- Safety footwear — S3 SR, S3S SR, SB P SR
- EN ISO 20349-2
- Welding boots — JBT-8387 only
- CE
- Certificate numbers on the spec sheet
Next line
All products
